[. . . ] QUICK START GUIDE PREPARING DEVICE FOR USE 1. Unpack items from carton 2. (This step for EM units only) Attach antennas and place in a "V" shape. [. . . ] You should see zero RF/AF activity on the meter (indicating you are on a free channel). 4. Power up the transmitter (SK, SKM) you wish to pair with the receiver. On a G3 handheld transmitter, the window is located on the LCD display. On a bodypack transmitter, it is located under the battery door just to the right of the ON/OFF button under a purple colored plastic. 2. 1. 5. Enter SYNC mode by pressing "SYNC" button (EM receivers) or selecting SYNC option from menu (EK receiver). Once the SYNC logo displays, hold the handheld or bodypack infrared window facing the left side of the receiver display about 6" away. When SYNC is successful, you will see a check mark briefly next to the SYNC logo on the receiver screen. If you see an "X" next to the SYNC logo, it indicates the sync failed and you should repeat the SYNC process. 1a. 2b. 3. FINAL SET-UP & TIPS It is suggested that you adjust the receiver (EM or EK) AF OUT setting to around 0dB for most situations. The SENSITIVITY setting (SK and SKM transmitters only) should be adjusted so that in your loudest passages, the AF PEAK indicator briefly illuminates. [. . . ] On portable camera sets the receiver will clip onto the included CA2 camera shoe mount. Sennheiser Electronic Corporation One Enterprise Drive, Old Lyme, CT 06371 Tel: (860) 434-9190 · Fax: (860) 434-1759 www. sennheiserusa. com [. . . ]